68 in stock
US Military Surplus
Couldn't load pickup availability
Color: ACU Digital
This kit is a popular choice for those looking for a practical set of gear. It includes previously issued, fully functional equipment used by the U.S. Army. All the items are made in the USA and feature ACU digital camouflage. To ensure you're getting genuine U.S. government-issued items, look for the National Stock Number (NSN) on each piece.
(1) MOLLE Assault Pack -
This is the official "issue" assault pack that the Army distributes to deploying units, in addition to the MOLLE Rifleman Set and other items in the RFI ensemble. Can be worn alone or attached to the MOLLE Rucksack. Consists of a large main pocket, zippered front cargo pocket, and a small utility pocket with Velcro® closure for smaller items. Also has a slot for a radio antenna or hydration drink tube. This assault pack is approved for airborne operations.
NSN: 8465-01-524-5250
(1) Fighting Load Carrier Vest -
This MOLLE II heavy duty US Military FLC load bearing vest will give you the edge in combat situations.
Make sure you have the edge in combat with this genuine issue US Military FLC (Fighting Load Carrier) vest! Made of heavy-duty 1000 Denier Cordura nylon, this vest will carry your gear easily with its MOLLE webbing and two inner pockets.
NSN: 8465-01-532-2302
(2) Hand Grenade Pouch -
Molle Pouch - water resistant nylon material, nylon webbing straps with snaps to attach to MOLLE vests and button snap closure. Holds one standard grenade.
Dimensions: (Length) 4 inches x (Width) 2.75 inches x (Height) 2 inches.
NSN: 8465-01-525-0589
(3) Double Mag Pouch -
Designed to hold two mags each, this pouch features stretch elastic to keep mags from jostling.
The wide, heavy hook & loop (Velcro) panels to close the top flap.
It folds flat when empty and features a webbing pull tab and a drain grommet on bottom.
Exterior dimensions measure approximately 7.5”H x 3.5”W x 2.5"D.
NSN: 8465-01-525-0606
(2) M4 Triple Magazine Pouch -
Water resistant nylon material, nylon webbing straps with snaps to attach to MOLLE vests. Each Holds three 30 round magazines for the M-16/M-4 series weapons. Features a flap cover that allows quick access to magazines, snap closure.
NSN: 8465-01-525-0598
(1) MOLLE II Bandoleer -
The Molle II Bandoleer Pouch is designed to attach to the inside of the Molle II Rucksack, Molle II Assault Pack and Molle II Patrol Pack. They also have a shoulder strap for independent carry. The pouch holds six double magazines.
NSN: 8465-01-524-7309
(1) Flashbang Grenade Pouch MOLLE II -
A MOLLE II flashbang grenade pouch, made in USA of 100% Cordura nylon. It features a quick release buckle, a grommet drainage hole, and a MOLLE strap on the back.
• 100% Cordura Nylon, made in USA
• Features a buckle closure top with a drain grommet in the bottom, MOLLE strap on back
• Ammunition pouch (designed for a flash-bang grenade, but holds numerous other items, too)
• Convenient carry pouch for pens, gps's, small cellphones, etc.
• Great for outdoors, camping, hiking, survival, zombie hunting, prepping, etc
NSN: 8465-01-524-7324
(2) 1 QT Utility Pouch Canteen Cover -
Made of heavy-duty nylon Cordura® and measures approximately 7" tall X 5" wide X 3" deep. Flap cover with a Fastex buckle closure. An elastic draw cord around the neck to hold the canteen in place if the flaps are not secured. On the exterior are two small pockets measuring 3 ½ X 3" X ¾" deep. 2 Straps on back to secure to belts, backpacks etc Genuine Military 1 Qt. Canteen: Made of high density polyethylene (hdpe) plastic. rigid, single wall construction. Screw cap. holds any type of liquid. fits into GI canteen covers. Issued by the U.S. Government! Made in USA!
NSN: 8465-01-525-0585
(2) 1 QT. Standard Issue Canteens (ODG) -
Color: Olive Drab Green
• BPA Free
• USGI Issue
NSN: 8465-01-115-0026
(1) Hydration Carrier System 100oz/3L (no bladder) -
This system is the way to go when you are seeking portable hydration. This system is an ideal way to keep hydrated when you are on the go: hiking, jogging or bicycling. The GI MOLLE II hydration carrier is constructed of water-resistant 500-denier nylon laminated to a single-cell foam backing; insulated to maintain the liquid temperature within the hydration system. It can hold the 100oz bladder and features quick slide-release buckles on both shoulders and chest strap, adjustable chest, and shoulder straps, a carrying handle at the top and one in the center of the carrier and two D-rings as attachment points for additional MOLLE components.
NSN 8465-01-525-5531
(1) Waist Pack -
This is a genuine issue ACU waist pack, also known as a butt pack or fanny pack from the U.S. Army. It is a handy item if you need some more storage. By being a U.S. Military issue item, you know it has been constructed to military indications and is created with high-quality solid construction and heavy-duty components. It features a quick-release buckle at the waist, a metal zipper, and a zippered compartment.
This waist pack can work on its own or can be attached to the ACU assault pack or rucksack with its adjustable MOLLE straps. Also, its adjustable buckle allows for a proper fit around a wide range of waist sizes.
NSN: 8465-01-524-7263
(1) Poncho Liner -
ACU Digital Poncho Liner is often used as a blanket. Poncho Liner has a quilted nylon shell, 100% polyester fill, fashioned after US issue liner size 81" x 63". Poncho liners do not have a head hole!
NSN: 8405-01-541-2559
(1) Entrenching Tool Carrier -
The US genuine issue MOLLE II ACU Entrenching Tool Cover made by Eagle Industries / Specialty Defense was designed to carry the army issue shovel. The 1000 denier nylon MOLLE II ACU Entrenching Tool Cover cover is very versatile, it will hold a variety of items other than an entrenching tool. The MOLLE II ACU Entrenching Tool Cover attaches to belts or MOLLE compatible gear. The MOLLE II ACU Entrenching Tool Cover fits most major brands of folding shovels, including the Grumman, SOG and Gerber folding shovels.
Features:NSN: 8465-01-524-8407
(1) MOLLE ACU Ruck Sack with Frame -
Ruck Sack: The Rucksack's main body has a zippered internal load divider, and openings at the top and bottom ends, to allow a sleeping bag (or other gear) to be loaded and unloaded independently without the need for an external "sleeping bag carrier”.
Single cylinder design, capacity of 4000 cubic inches. A top flap with a mesh pocket for small reference and information materials, that is secured with a hook and loop closure. Nylon duck material, water resistant.
(2 each) Sustainment Pouches - NSN: 8465-01-524-7226 Sustainment pouch has two D-rings on the sides, which allow them to be carried by a "General Purpose Sling" for alternate uses. Textured nylon duck material.
(1) Main Bag Only - NSN 8465-01-524-5285
(1) Plastic Molle Pack frame - NSN: 8465-01-524-8368
(1 each) Shoulder harness - NSN: 8465-01-524-7240 2 Straps padded; adjustable; covered with textured nylon duck material.
(1) Molded Waist Belt - NSN: 8465-01-524-7232 The molded waist belt is constructed of a molded foam pattern, covered in textured nylon duck. Has nylon webbing straps.
(2 each) Quick Release Straps - NSN: 8465-01-524-8415 2 Foliage quick release straps male adapter clips.
(2 each) Load lifter - NSN: 8465-01-641-9867 Load lifter attachment strap.
*Other features: Nylon webbing straps around front and sides for attachment of MOLLE compatible pockets (sold separately).
4 external compression straps. Half moon zipper opening on the lower front to enable access to items in the bottom of ruck. Webbing buckles for attaching to the MOLLE frame. ACU Digital Camouflage.
All components are fully functional. Used components may have name or other markings, but there are no rips or tears and no broken buckles or zippers.
NSN: 8465-01-524-5285
INTERNATIONAL CUSTOMERS: SEND US A MESSAGE WITH YOUR COUNTRY AND SHIPPING POSTAL CODE FOR CALCULATED SHIPPING COSTS
