16pc Rifleman Kit MOLLE System OCP Complete Set USGI

16pc Rifleman Kit MOLLE System OCP Complete Set USGI ARMY 

 Color: OCP/Multicam

This kit is a popular choice for those looking for a practical set of gear. It includes previously issued, fully functional equipment used by the U.S. Army. All the items are made in the USA and feature OCP (Operational Camouflage Pattern). To ensure you're getting genuine U.S. government-issued items, look for the National Stock Number (NSN) on each piece.

(1) MOLLE Assault Pack -

This is the official "issue" assault pack that the Army distributes to deploying units, in addition to the MOLLE Rifleman Set and other items in the RFI ensemble.  Can be worn alone or attached to the MOLLE Rucksack. Consists of a large main pocket, zippered front cargo pocket, and a small utility pocket with Velcro® closure for smaller items.  Also has a slot for a radio antenna or hydration drink tube. This assault pack is approved for airborne operations.

• Genuine RFI-Issue MOLLE Assault Pack, currently in use by hundreds of thousands of Soldiers worldwide. Has been issued to Conventional as well as Special Operations Forces.
• Consists of a large main pocket, a zippered front cargo pocket and separate exterior hydration sleeve.
• Shoulder straps have quick-disconnect buckles to allow the pack to be "ditched" rapidly in emergency situations
• Jump-certified and approved for airborne operations
• Manufactured with pride in the U.S.A.

NSN: 8465-01-580-0981

(1) MOLLE Tactical Assault Panel (TAP) -

The MOLLE Tactical Assault Panel (TAP) is a piece of modular, load-bearing equipment used by the U.S. military, particularly the Army, as a chest rig. It is designed to be a versatile platform for carrying essential gear and can be worn as a standalone system or integrated with body armor.

Features and Uses:

• Modular Design: The TAP is built around the Modular Lightweight Load-carrying Equipment (MOLLE) system. Features webbing on the front, allowing for the attachment of various pouches and accessories based on mission requirements. Ammunition

• Carrying Capacity: The panel typically includes built-in pouches for carrying magazines, with many designs accommodating up to eight M4/M16 magazines (one per pocket) and sometimes more in the outer, larger pockets.

• Versatility and Integration: The TAP can be worn in several ways:

• Stand-alone Chest Rig: It can be used on its own with an adjustable and removable harness system.

• Integrated with Body Armor: It is designed to attach to various plate carriers and tactical vests, such as the Improved Outer Tactical Vest (IOTV) and the Modular Scalable Vest (MSV), allowing a soldier to have quick access to their combat load.
• Organization and Accessibility: The panel is structured to provide easy access to critical items. In addition to magazine pouches, it often has pockets on the back for flat items like maps, compasses, or other administrative supplies. The outermost pockets are often slightly larger to accommodate radios or other equipment.
• Durability: TAPs are typically constructed from rugged, military-grade materials like 1000 Denier Cordura fabric, built to withstand harsh environments and heavy use.
• Quick-Release Mechanism: Many TAPs are designed with quick-release systems, enabling the user to rapidly detach their gear in emergency situations.

The MOLLE TAP is a practical and adaptable piece of gear used by military personnel, law enforcement, and outdoor enthusiasts for its ability to organize and carry a significant amount of essential equipment while maintaining a relatively low profile and distributing weight effectively.

NSN: 8465-01-580-0689

(2) Hand Grenade Pouch -

Molle Pouch - water resistant nylon material, nylon webbing straps with snaps to attach to MOLLE vests and button snap closure. Holds one standard grenade.

Dimensions: (Length) 4 inches x (Width) 2.75 inches x (Height) 2 inches.

NSN: 8465-01-580-0967

(3) Double Mag Pouch -

Designed to hold two mags each, this pouch features stretch elastic to keep mags from jostling.

The wide, heavy hook & loop (Velcro) panels to close the top flap.

It folds flat when empty and features a webbing pull tab and a drain grommet on bottom.

Exterior dimensions measure approximately 7.5”H x 3.5”W x 2.5"D.

NSN: 8465-01-580-0701

(2) M4 Triple Magazine Pouch -

Water resistant nylon material, nylon webbing straps with snaps to attach to MOLLE vests. Each Holds three 30 round magazines for the M-16/M-4 series weapons. Features a flap cover that allows quick access to magazines, snap closure.

NSN: 8465-01-580-0967

(1) MOLLE II Bandoleer -

The Molle II Bandoleer Pouch is designed to attach to the inside of the Molle II Rucksack, Molle II Assault Pack and Molle II Patrol Pack. They also have a shoulder strap for independent carry. The pouch holds six double magazines.

NSN: 8465-01-580-1312

(1) Flashbang Grenade Pouch MOLLE II -

A MOLLE II flashbang grenade pouch, made in USA of 100% Cordura nylon. It features a quick release buckle, a grommet drainage hole, and a MOLLE strap on the back.

• 100% Cordura Nylon, made in USA

• Features a buckle closure top with a drain grommet in the bottom, MOLLE strap on back

• Ammunition pouch (designed for a flash-bang grenade, but holds numerous other items, too)

• Convenient carry pouch for pens, gps's, small cellphones, etc.

• Great for outdoors, camping, hiking, survival, zombie hunting, prepping, etc

NSN: 8465-01-580-1313

(2) 1 QT Utility Pouch Canteen Cover -

Made of heavy-duty nylon Cordura® and measures approximately 7" tall X 5" wide X 3" deep. Flap cover with a Fastex buckle closure. An elastic draw cord around the neck to hold the canteen in place if the flaps are not secured. On the exterior are two small pockets measuring 3 ½ X 3" X ¾" deep. 2 Straps on back to secure to belts, backpacks etc Genuine Military 1 Qt. Canteen: Made of high density polyethylene (hdpe) plastic. rigid, single wall construction. Screw cap. holds any type of liquid. fits into GI canteen covers. Issued by the U.S. Government! Made in USA!

• Made of heavy-duty nylon Cordura®
• Dimensions: approximately 7" tall X 5" wide X 3" deep
• Issued by the U.S. Government! Made in USA!

NSN: 8465-01-580-0693

(1) Hydration Carrier System 100oz/3L (no bladder) -

This system is the way to go when you are seeking portable hydration. This system is an ideal way to keep hydrated when you are on the go: hiking, jogging or bicycling. The GI MOLLE II hydration carrier is constructed of water-resistant 500-denier nylon laminated to a single-cell foam backing; insulated to maintain the liquid temperature within the hydration system. It can hold the 100oz bladder and features quick slide-release buckles on both shoulders and chest strap, adjustable chest, and shoulder straps, a carrying handle at the top and one in the center of the carrier and two D-rings as attachment points for additional MOLLE components.

• Measures 19" x 7.5"
• M.O.L.L.E. II Backpack Pouch will Strap or Clip Other Items to Back of Carrier
• Carrying Handle at the Top and One in the Center
• Cordura Outer Shell for Abrasion Resistance Laminated to a Foam Insulated Inner Lining to Help Keep Water Cool
• Adjustable Chest and Shoulder Straps
• Integrated Shoulder Strap Assembly for Carrying, and Pull Handles Located on the Top and Front of the System to Help Locate When in Rucksack or Assault Pack
• Quick Slide Release Buckles
• D-Rings for Attachment Points
• Modular Webbing on the Front Allows for the Attachment of M.O.L.L.E. Compatible Pockets
• Genuine U.S. Military Issue

NSN 8465-01-580-1316

(1) Waist Pack -

This is a genuine issue ACU waist pack, also known as a butt pack or fanny pack from the U.S. Army. It is a handy item if you need some more storage. By being a U.S. Military issue item, you know it has been constructed to military indications and is created with high-quality solid construction and heavy-duty components. It features a quick-release buckle at the waist, a metal zipper, and a zippered compartment.

This waist pack can work on its own or can be attached to the ACU assault pack or rucksack with its adjustable MOLLE straps. Also, its adjustable buckle allows for a proper fit around a wide range of waist sizes.

• 100% Nylon Cordura
• Water-resistant
• Adjustable compression straps
• Adjustable waist buckle
• Made in USA

NSN: 8465-01-580-1300

(1) Entrenching Tool Carrier -

**Entrenching Tool not included**

NSN: 8465-01-580-1303

• CONDITION GUIDELINES •

FREE SHIPPING ON ALL ORDERS OVER $99 TO THE LOWER 48 STATES. NO P.O. BOXES PLEASE - SHIPS SAME DAY IF ORDERED BY 3PM CST MON - FRI, EXCLUDING WEEKENDS AND HOLIDAYS

INTERNATIONAL CUSTOMERS: SEND US A MESSAGE WITH YOUR COUNTRY AND SHIPPING POSTAL CODE FOR CALCULATED SHIPPING COSTS